| Advanced structural design for the construction of pressure- and temperature-resistant buildings |
Boonchai Sonthironnachai, Arthit Petchsasithon |
|
Article |
| Experimental investigation of flexural capacity and deflection of low strength RCC beam strengthened with flexural steels and steel shear key |
Mohammad Kamruzzaman Talukder, Md. Naimul Haque |
|
Article |
| Seismic response of NRB structure considering SSI under transmitting boundaries |
Vijay Kumar, Sunita Kumari |
|
Article |
| Shear behavior of RC beams strengthened with ultra-high-performance fiber-reinforced concrete using finite-element analysis |
Ghada M. Hekal, Magdy I. Salama, Galal Elsamak, Ahmed H. Almaadawy |
|
Article |
| Strengthening of partially ductile RC beam–column connections |
Abhay V. Gujar, S. M. Pore |
|
Article |
| Analytical approach for damping model |
Mohankumar N. Bajad |
|
Article |
| Seismic vulnerability assessment of masonry building supported by STRP isolators |
Md Basir Zisan, Md. Naimul Haque, Md. Abul Hasan |
|
Article |
| Seismic vulnerability assessment of masonry buildings in Karachi |
Aslam F. Mohammad, Rashid A. Khan, Engr. Bushra Fatima, Engr. Aaqib Shaukat, Engr. Muhammad Mujtaba |
|
Article |
| Estimating the seismic pounding force between adjacent buildings and study the effect of gap distance on seismic pounding |
Kamel T. Kamel |
|
Article |
| Prediction of concrete compressive strength with GGBFS and fly ash using multilayer perceptron algorithm, random forest regression and k-nearest neighbor regression |
Dalin Ghunimat, Ahmed Essa Alzoubi, Abdelrahman Alzboon, Shadi Hanandeh |
|
Article |
| Bond-behavior improvement of carbon fiber reinforced polymer bars: an experimental study |
Alaa Hassoon, Nibras Khalid, Muhaned A. Shallal |
|
Article |
| Investigation on fluidity, microstructure, mechanical and durability properties of snail shell-based graphene oxide cement composite material |
Suseela Alla, SS. Asadi |
|
Article |
| Effect of different width ratio and transversal link pattern on the load carrying capacity of partially encased composite column |
Badrinarayan Rath, Shiferaw Garoma, Robe Kudama, Elmer C. Agon, Tigist Tadese, Endalkachew Mosisa Gutema |
|
Article |
| Shear strength model of large-scale reinforced concrete rectangular columns with light transverse reinforcement |
Huy PA Pham |
|
Article |
| Developing sustainability assessment indicators for measuring contractor’s performance during the construction phase of construction projects in Jordan |
Moawiah Alnsour, Alia Zeidan, Bayan Al Quwaider, Amnah Alkubaisi, Reham Alreqeb, Mahmoud Bader |
|
Article |
| Experimental study and development of machine learning model using random forest classifier on shear strength prediction of RC beam with externally bonded GFRP composites |
Amna Hamed Salim Al Mamari, Rawan Said Humaid Hammad Al Ghafri, N. Aravind, Ragavesh Dhandapani, Eman Muhye Adeen Muhye Al Hatali, Rani Pandian |
|
Article |
| Performance assessment of buildings seismically isolated with scrap tire rubber pad isolators |
Md. Basir Zisan, Md. Abul Hasan, Md. Naimul Haque |
|
Article |
| Effectiveness of fluid viscous dampers in the seismic performance enhancement of RC buildings |
Pramod Tiwari, Pradej Badal, Rajan Suwal |
|
Article |
| Shear strength of reinforced concrete beam–column joints |
Ahmed Faleh Al-Bayati |
|
Article |
| A review of construction management challenges and BIM-based solutions: perspectives from the schedule, cost, quality, and safety management |
Mohammadsaeid Parsamehr, Udara Sachinthana Perera, Tharindu C. Dodanwala, Piyaruwan Perera, Rajeev Ruparathna |
|
Article |
| A comparison between mechanical and physical properties of concretes containing superabsorbent polymer and polymers |
Nasim Ghasemi, Mojtaba Fathi, Mahdi Mazhari |
|
Article |
| Determination of optimum design parameters of non-linear damped outrigger system for high-rise buildings |
Ritik Saxena, S. P. Singh, M. Abdul Akbar |
|
Article |
| Behavior of fiber-reinforced expansive cement concrete columns |
Krithika Paramesh, Gajalakshmi Pandulu, Revathy Jeyaseelan |
|
Article |
| Impact of covid-19 on supply chain management in construction industry in Kashmir |
Sofi Adnan Farooq, B. Indhu, P. Jagannathan |
|
Article |
| An experimental behavior of the bond-slip performance of hybrid fiber concrete-filled steel tube columns with shear studs |
A. Arokiaprakash, S. Senthil Selvan |
|
Article |
| Nonlinear dynamic analysis of concrete gravity dams utilizing a simplified continuum damage model and different damping algorithms |
Reza Akbari, Vahid Lotfi |
|
Article |
| Automatic prediction of the freezing and thawing effect on concrete structure using deep learning methodology |
S. Priyadharsini, P. Vijay Prathap, R. Nandha Kumar, R. Suganya, R. Theenathayalan |
|
Article |
| Seismic performance and assessment of RC framed structure with geometric irregularities |
Vikas Mehta, Min Ho Chey |
|
Article |
| GIS-based multi-criteria decision-making for ranking potential sites for centralized rainwater harvesting |
Deshbhushan Patil, Rajiv Gupta |
|
Article |
| Influence of concrete's poor-quality management on the seismic behavior of RC frames subject to near-field pulse-like ground motions |
Buthainah Al-kharabsheh, Hasan Alqawasmeh, Yazan Alzubi, Ahmed Khatatbeh |
|
Article |
| Generating seismic fragility curves of RC frame building using NSPA and IDA |
Kaushik Gondaliya, Jignesh Amin, Vishisht Bhaiya, Sandip Vasanwala, Atul Desai |
|
Article |
| Free vibration analysis of exponential AFGM beams with general boundary conditions and tip masses |
Mohsen Bambaeechee, Morteza Jalili Qazizadeh, Omid Movahedian |
|
Article |
| Study of the effects of adding vertical stiffeners on the frequency and seismic behavior of the cylindrical intake tower, considering the interaction of water and structure |
Ehsan Teymouri, Saeed Abbasi |
|
Article |
| Finite element modeling of static and cyclic response of functionality graded material beams |
Khaled Boumezbeur, Mourad Khebizi, Mohamed Guenfoud |
|
Article |
| Finite-element analysis for the performance of steel frames under fire after earthquake |
Mohammed Redha Merouani, Abdelhak Kada, Belkacem Lamri, Paulo A. G. Piloto |
|
Article |
| Seismic hazard assessment and significance of ground motion prediction equations: a deterministic approach |
Ashish Kumar Parashar |
|
Article |
| Local topography factor for design wind speeds near and on the escarpment with gentle slope |
Abdul H. WaniRajendra K. VarmaAshok K. Ahuja |
|
Article |
| Investigation of uniaxial tensile and compressive behavior of SFRC |
Srinivasa Rao KuppalaSuseela KyleArunchaitanya Sambangi |
|
Article |
| Effect of transverse opening on the strength of reinforced concrete column |
Hailu BezaGoshu Kenea |
|
Article |
| A deductive design method to simplify ASCE 41-17 nonlinear static procedure preserving the adjusted collapse margin ratio of steel moment frames |
Mohsen ShahrouziMehrdad Ebadijalal |
|
Article |
| Flexural analysis of laminated composite porous plate |
Raushan KumarAjay Kum |
|
Article |
| An analysis of maintenance demand factors in hospital buildings using the association rule technique |
AbdulLateef OlanrewajuWai Fang WongPoh Im Lim |
|
Article |
| Fuzzy clustering of structural members for efficient design optimization |
Ishwaragouda S. PatilSharad G. JoshiShabarish V. Patil |
|
Article |
| Deep CNN-based concrete cracks identification and quantification using image processing techniques |
Madhuri GonthinaRenuka ChamataVenkat Lute |
|
Article |
| Analysis on performance of eco-friendly engineered cementitious composite for construction and environmental sustainability |
Muppalla Venkata Sai Surya Pratap ChowdaryS. S. Asadi |
|
Article |
| An investigation on optimal outrigger locations for hybrid outrigger system under wind and earthquake excitation |
Neethu Elizabeth JohnKiran Kamath |
|
Article |
| Jellyfish search optimization for tuned mass dumpers for earthquake oscillation of elevated structures including soil–structure interaction |
Kumar VanshajArvind Kumar ShuklaAbhishek Mishra |
|
Article |
| Effect of subterranean levels on the foundation input motions for dynamic response analysis of building structure |
Zeleke Lulayehu TadesseHari Krishna PadavalaVenkata R. P. Koteswara |
|
Article |
| Closed-form relationships of flexural moment–curvature-axial force for I-shaped steel sections |
Abbas ShamivandJalal Akbari |
|
Article |
| Development of seismic fragility curves for RC/MR frames using machine learning methods |
Zohreh Jabari SalmiMohammad Iman KhodakaramiFarhad Behnamfar |
|
Article |
| Salp swarm optimization of active tuned mass dampers in asymmetric plan buildings including SSI effects |
Abhishek MishraA. K. ShuklaKumar Vanshaj |
|
Article |
| Multi-objective optimized high-strength concrete mix design using a hybrid machine learning and metaheuristic algorithm |
Rupesh Kumar TipuV. R. PanchalK. S. Pandya |
|
Article |
| Predict a model of the reliability engineering approach to estimating, risk management, and cost predicting for private residential projects in Iran |
Arash Gorgin KarajiTowhid PourrostamSoheil Monajeminejad |
|
Article |
| Strengthening of historic reinforced concrete columns using concrete and FRP jacketing techniques |
Khaled SamyAhmed FawzyMohamed Attia Fouda |
|
Article |
| Output-only identification of a simplified onshore wind turbine model using a modified harmony search algorithm |
Mahmoud Jahjouh |
|
Article |
| Design aids for special-shaped reinforced concrete columns subjected to biaxial bending |
Rangesh JajodiaSangeeta Gadve |
|
Article |
| A study on the near and far-field earthquake response of a low and mid-rise building resting on soft soil considering soil–structure interaction (SSI) |
Sajjad Golafshani, Ali Akhtarpour, Sajjad Khosravi |
|
Article |
| Probabilistic study of strength and cover effects on reinforced concrete chloride corrosion |
Seyedreza Alinaghimaddah, Ali Akbar Hasandoost, Amir Safiey |
|
Article |
| Approximation of elasticity modulus of groundnut shell ash-based self-consolidating high-performance concrete using artificial neural network |
T. A. BuariJ, S. AdelekeB. I. O. Dahunsi |
|
Article |
| Predicting labour productivity for formwork activities in high-rise building construction: a case study |
Vijay BhilwadeVenkata Santosh Kumar DelhiKeyur Modi |
|
Article |
Evaluation of the seismic performance of structures equipped with novel multi-level TADAS dampers
|
Arash Akbari ,HamedSeyedeh, Fatemeh Mortazavi,Mahsa Saeidzadeh |
|
Article |
Multiple layer radial basis neural network with remora regression tree optimum feature extraction for structural health monitoring
|
S. Pradeep KumarM. Beenamol |
|
Article |
A novel probabilistic approach to the plastic analysis of steel moment frames
|
Larah R. Abdulwahed |
|
Article |
An experimental study on the effect of the mesh index: a new parameter influencing the shear strength of RC beams provided with welded wire mesh as transverse reinforcement
|
D. Rama SeshuCh. ManjulaC. B. K. Rao |
|
Article |
Integrating the multi-objective elephant herding optimization based time–cost trade-off model with earned value management
|
Rakesh GuptaManoj Kumar Trivedi |
|
Article |
| Parametric study on the behavior of thin-walled castellated beams subjected to static monotonic loading using finite-element analysis |
Basem O. RagehGalal ElsamakAhmed H. Elmasry |
|
Article |
| Optimisation of polypropylene and steel fibres for the enhancement of mechanical properties of fibre-reinforced concrete |
Bhawani AntarvediNawal Kishor BanjaraSuvir Singh |
|
Article |
| Deaggregation of seismic hazard for Amaravati capital region in Peninsular India |
M. Madhusudhan ReddyCh. Hanumantha RaoG. Kalyan Kumar |
|
Article |
| Impact characteristics of ultra-high-performance fiber reinforced concrete plates under different boundary conditions |
Suruchi MishraH. K. Sharma |
|
Article |
| GA-based hybrid ANN optimization approach for the prediction of compressive strength of high-volume fly ash concrete mixes |
A. Fuzail HashmiM. AyazA. Baqi |
|
Article |
| Development of a robust structural health monitoring system: a wireless sensor network approach |
Sanjay SinghRama Shanker |
|
Article |
| Correction: Strengthening of historic reinforced concrete columns using concrete and FRP jacketing techniques |
Khaled SamyAhmed FawzyMohamed Attia Fouda |
|
Article |
| Correction: Role of copper slag on improvement of strength, quality and durability of high-strength self-compacting concrete: an industrial waste |
Arunchaitanya SambangiArunakanthi Eluru |
|
Article |