Strength and ductility of rubberized concrete beams with micro-reinforcement- Pages 1-15
|
R. Karthikeyan, P. N. Raghunath, K. Suguna |
|
Article |
Non-linear buckling analysis of composite columns made from high and normal strength concrete under fire- Pages 17-27
|
Abdelkadir Fellouh, Abdelkader Bougara |
|
Article |
Cyclic behaviour of steel ring filled with compressive plastic or concrete, installed in the concentric bracing system- Pages 29-39
|
Mostafa Kazemi, Mohammad Ali Kafi |
|
Article |
An insight into temperature characteristics of ternary blended concrete with perlite powder- Pages 41-48
|
K. Varun Teja, T. Meena |
|
Article |
Effect of cement replacement by fly ash and epoxy on the properties of pervious concrete- Pages 49-58
|
Zainab Hashim Abbas Al-sallami, Qosai S. Radi Marshdi |
|
Article |
Seismic vulnerability assessment using the macroseismic method proposed in the framework of Risk-UE project based on the recommendations of the Algerian seismic code RPA99/Version 2003- Pages 59-66
|
Hadi Taibi, Mourad Ait Youcef, Mourad Khellafi |
|
Article |
Uniform risk vs. uniform hazard spectral acceleration for different soil types in Alborze seismic zone- Pages 67-79
|
Fatemeh Soleiman Meigooni, Mohsen Tehranizadeh |
|
Article |
Analysis of reinforced concrete rectangular slabs with three-sides supported under uniformly distributed load- Pages 81-90
|
Sushant Gupta, Harvinder Singh |
|
Article |
Assessment of predominant frequencies in Dhaka city, Bangladesh using ambient vibration- Pages 91-104
|
M. A. Ansary, M. R. Arefin |
|
Article |
Factors affecting performance at the Iraqi Construction Projects, Ministry of Construction, and Housing and Municipalities and Public Works of Iraq as a case study- Pages 105-118
|
Awss Hatim Mahmoud |
|
Article |
Rammed earth, as a sustainable and structurally safe green building: a housing solution in the era of global warming and climate change- Pages 119-136
|
Binod Khadka |
|
Article |
Componentwise-embodied energy analysis of affordable houses in India- Pages 137-145
|
Deepak Bansal, Vijay K. Minocha, Arvinder Kaur |
|
Article |
Fire resistance and thermal insulation properties of foamed concrete incorporating pulverized ceramics and mineral admixtures- Pages 147-156
|
Paul Awoyera, Emmanuel Onoja, Adeyemi Adesina |
|
Article |
Experimental investigation on behavior of reinforced concrete interior beam column joints retrofitted with fiber reinforced polymers- Pages 157-171
|
Bhuiyan Mohammad Golam Kibria, Fahim Ahmed |
|
Article |
An alternative approach to lateral load analysis of framed type elevated water tank stagings- Pages 173-188
|
Ramesh Velivela, Ravindra Vipparthy |
|
Article |
Performance characteristics of a solar desiccant/M-cycle air-conditioning system for the buildings in hot and humid areas- Pages 189-199
|
Maryam Karami, Shahram Delfani, Ali Noroozi |
|
Article |
Axiomatic design framework for changeability in design for construction projects- Pages 201-215
|
S. P. Sreenivas Padala, J. Uma Maheswari |
|
Article |
A numerical investigation of the inelastic cyclic behaviour of short and long links designed according to RPA 99 provisions- Pages 217-228
|
Abderrahim Labed, Toufik Benmansour |
|
Article |
A simulation-based decision-making framework for construction supply chain management (SCM)- Pages 229-241
|
Ajinkya Kulkarni, Srijeet Halder |
|
Article |
Use of ceramic waste powder for manufacturing durable and eco-friendly bricks- Pages 243-252
|
Muhammad Hassan Riaz, Anwar Khitab, Sajjad Ahmad |
|
Article |
An investigation on energy consumption in residential building with different orientation: a BIM approach- Pages 253-266
|
Subbarao Yarramsetty, M. Sayed Rohullah |
|
Article |
Seismic response control of steel benchmark building with a tuned mass damper- Pages 267-280
|
Said Elias, Vasant Matsagar |
|
Article |
Experimental and analytical investigation of structural performance of vertical concrete formworks- Pages 281-292
|
R. Sagadevan, B. N. Rao |
|
Article |
Life-cycle sustainability design of RC frames under the seismic loads- Pages 293-310
|
Arezoo Nouri, Payam Asadi, Masoud Taheriyoun |
|
Article |
Identifying critical success factors of ERP in the construction industry- Pages 311-329
|
Akshay Gavali, Srijeet Halder |
|
Article |
Experimental and numerical analysis of the behaviour of masonry walls strengthened with CFRP reinforced render- Pages 331-349
|
João Guerreiro, João Gomes Ferreira, Jorge Proença |
|
Article |
Performance evaluation of high-performance fibre-reinforced concrete composite beam–column joint subjected to quasi-static loading- Pages 351-365
|
S Praveenkumar, G Sankarasubramanian |
|
Article |
An engineering approach towards the traditional beliefs in house construction- Pages 367-380
|
Madujith Sagara Chandra, Kasun Nandapala |
|
Article |
Comparative performance evaluation of RC frame structures using direct displacement-based design method and force-based design method- 381-394
|
Anurag Sharma, R. K Tripathi, Govardhan Bhat Pages |
|
Article |
Performance evaluation on effects of all types of infill against the progressive collapse of reinforced concrete frames- Pages 395-409
|
Mohammad Bigonah, Hussein Soltani |
|
Article |
Anchorage length of reinforcing bars in tension: an assessment of the Australian Standard AS 3600:2018- Pages 411-420
|
Maruful Hasan Mazumder, Raymond Ian Gilbert |
|
Article |
Structural performance of partially lateral restrained two-way solid slab- Pages 421-435
|
Boshra El-Taly, Ahmed Abd Alhy, Magdy Tayel |
|
Article |
Numerical verification of accelerometer-based assessment of hollow-type pretensioned concrete girder- Pages 437-447
|
Bashir Ahmad Aasim, Abdul Khaliq Karimi, Jun Tomiyama |
|
Article |
Experimental and numerical investigation of axial load effects on the seismic behavior of steel moment-resisting frames and buckling-restrained knee-braced frames- Pages 449-461
|
M. TahamouliRoudsari, M. Torkaman, F. Soroush |
|
Article |
Experimental and computational dynamic response comparison of hybrid and mono windmill towers considering soil–structure interaction- Pages 463-478
|
Hemal J. Shah, Atul K. Desai |
|
Article |
Statistical methods applied to construction process management- Pages 479-494
|
Darja Kubečková, Stanislav Smugala |
|
Article |
Experimental and theoretical modeling coupled to a reliability approach for flexural failure prediction in hybrid composite beams- Pages 495-504
|
Souad Ait Taleb, Abdelmadjid Si Salem |
|
Article |
Data privacy in construction industry by privacy-preserving data mining (PPDM) approach- Pages 505-515
|
Tirth Patel, Vejal Patel |
|
Article |
Evaluation of the moment–rotation curve of steel beam-to-column joints with flange-plate- Pages 517-531
|
Seyed Mostafa Shabanian, Gholamreza Abdollahzadeh |
|
Article |
Design guidelines of composite sections for concrete beams with profiled steel sheath encasement- Pages 533-542
|
Salah Taher, Khaled Fawzy, Nashwa Yossef |
|
Article |
Seismic hazard curves for Warangal city in Peninsular India- Pages 543-554
|
Mohammad Muzzaffar Khan, Teja Munaga |
|
Article |
Durability of concrete reinforced with alfa fibres exposed to external sulphate attack and thermal stresses- Pages 555-567
|
Sami Ziane, Mohammed-Rissel Khelifa, Samy Mezhoud |
|
Article |
Identifying factors affecting construction labour productivity in India and measures to improve productivity- Pages 569-579
|
Aman Agrawal, Srijeet Halder |
|
Article |
| An experimental and numerical investigation of reduced beam section connections with horizontal and vertical web stiffeners- Pages 581-595 |
M. Tahamouli Roudsari, H. Jamshidi K., F. Akbari G |
|
Article |
Effect of copper slag on the resistance characteristics of SCC exposed to the acidic environment- Pages 597-609
|
Yasser Sharifi, Iman Afshoon, Morteza Nematollahzade |
|
Article |
Seismic response of infilled steel braced frames by endurance time analysis- Pages 611-624
|
Mohammad Jamshidi Avanaki, Mohammad Abedi |
|
Article |
The effect of crack width on chloride threshold reaching time in reinforced concrete members- Pages 625-637
|
M. A. Shayanfar, S. M. H. Farnia, M. Ghanooni-Bagha |
|
Article |
Digital project management in infrastructure project: a case study of Nagpur Metro Rail Project- Pages 639-647
|
Pratik D. Pakhale, Aritra Pal |
|
Article |
Delay factors in construction of healthcare infrastructure projects: a comparison amongst developing countries- Pages 649-661
|
Yash Kumar Mittal, Virendra Kumar Paul, Ali Rostami |
|
Article |
Experimental study on shear behaviour of precast shear wall–slab dowel connection- Pages 663-676
|
S. Arthi, K. P. Jaya |
|
Article |
Behaviour of polypropylene fibre-reinforced concrete beam with CFRP reinforcement under elevated temperature- Pages 677-694
|
Saranya Ilango, Sunil Mahato |
|
Article |
Role of BIM technology in enhancing safety analysis of Iraqi oil projects- Pages 695-706
|
Hayder Razzaq Abed, Wadhah Amer Hatem |
|
Article |
Mathematical models for the optimal design of I- and H-shaped crane bridge girders- Pages 707-722
|
Rana A. M. Alhorani |
|
Article |
Improved seismic design method for steel moment frames- Pages 723-731
|
Alireza Darabi, Jalal Akbari |
|
Article |
Study on the behavior of a one way eccentric braced frame under lateral load- Pages 733-739
|
D. Setyowulan, L. Susanti, M. N. Wijaya |
|
Article |
Automated rotational- and scaling-invariant image-based crack width monitoring with sub-millimeter accuracy and self-numbering label- Pages 741-749
|
Xingzhuang Zhao |
|
Article |
Performance assessment of a solar thermal combisystem in different climate zones- Pages 751-762
|
Maryam Karami, Farbod Javanmardi |
|
Article |
A hybrid approach for a cost estimate of residential buildings in Egypt at the early stage- Pages 763-774
|
Mohamed Badawy |
|
Article |
Investigation on the seismic fragility of in-plane loaded low- and medium-rise rectangular RC structural walls- Pages 775-783
|
Florin Pavel |
|
Article |
Geometrically nonlinear analysis of space trusses using new iterative techniques- Pages 785-795
|
Mehdi Mohit, Yasser Sharifi, Ali Tavakoli |
|
Article |
Numerical simulation of ultra-high-performance fiber-reinforced concrete frame structure under fire action- Pages 797-804
|
Viet-Chinh Mai, Trong-Chuc Nguyen, Cong-Binh Dao |
|
Article |
Rheological study of heavy cement grouts with physical and chemical characterization of barite powder- Pages 805-813
|
Z. Damiche, M. Lounis, M. Hamadache, H. Maachou |
|
Article |
Performance evaluation of self-compacting concrete containing volcanic ash and recycled coarse aggregates- Pages 815-827
|
Jayasree Chakkamalayath, Antony Joseph |
|
Article |
The correlation between the ground motion intensity measure parameters of earthquakes- Pages 829-840
|
Emad A. Elhout |
|
Article |
Relationship of strength reduction factor and maximum ductility factor for seismic design of one-storey industrial steel frames- Pages 841-856
|
Dinh Van Thuat, Ho Viet Chuong, Bach Duong |
|
Article |
Seismic behaviour of stiffness irregular steel frames under mainshock–aftershock- Pages 857-870
|
Samyak D. Parekar, Debarati Datta |
|
Article |
Assessing the three-dimensional seismic behavior of the multi-degree-of-freedom (MDOF) structure with LCRB and LRB control systems- Pages 871-884
|
Mohammad Reza Bagerzadeh Karimi |
|
Article |
The effects of foundation uplift on seismic response of diagonally braced steel frames- Pages 885-902
|
M. Mahmoudi, M. Hoodinshad, M. Jalili Sadr Abad |
|
Article |
Improve the calculation accuracy of the optimal insulation thickness in building walls as determined by a dynamic heat transfer model- Pages 903-913
|
Hichem Necib, Brahim Necib |
|
Article |
Effect of skylight–roof ratio on warehouse building energy balance and thermal–visual comfort in hot-humid climate area- Pages 915-923
|
Remon Lapisa, Arwizet Karudin, M. Martias |
|
Article |
A novel sensitivity-based method for damage detection of a structural element
|
H. R. Amiri- M. J. Esfandiari- G. Urgessa |
|
Article |
Performance of natural rubber latex on calcined clay-based glass fiber-reinforced geopolymer concrete
|
Badrinarayan Rath- Ramu Debnath- Dhivya Balamoorthy |
|
Article |
Probabilistic prediction of earthquake by bivariate distribution
|
Hamzeh Dehghani- Mohammad Javad Fadaee |
|
Article |
Structural behaviour of castellated steel beams with reinforced web openings
|
Samadhan G. Morkhade- Rutuja S. Lokhande- Mrunmayi U. Chavan |
|
Article |
Smell Bees Optimization algorithm for continuous engineering problem
|
Mohammad Sajjad Massoudi- Sepehr Sarjamei- Mehdi Esfandi Sarafraz |
|
Article |
Influence of temperature on bond–slip characteristics of concrete containing fly ash
|
N. Sureshbabu- George Mathew |
|
Article |
Automatic detection of seismic damages from very high monoscopic spatial images
|
M. Bensaibi- S. Saadi, A. Bouder |
|
Article |
Evaluation of characteristic peak ground acceleration (CPGA) as a ground motion intensity measure to reduce the dispersion of IDA curves
|
Bakhtiyar Ghanbari- Amir H. Akhaveissy |
|
Article |
Effectivity of BIM technology in using green energy strategies for construction projects
|
Farah Faaq Taha- Wadhah Amer Hatem- Nidal Adnan Jasim |
|
Article |
Generalized logic for modeling and obtaining harmonics estimation in shake table using LabVIEW with experimental validation
|
R. B. Malathy- Govardhan Bhat- U. K. Dewangan |
|
Article |
The behaviour of hybrid-reinforced concrete T-beams exposed to the flexural moment
|
Zahraa Hadi Marzoq- Tumadhir Merawi Borhan |
|
Article |
Exploring the failure factors of Yemen construction industry using PLS-SEM approach
|
Yaser Gamil- Ismail Abdul Rahman- Nur Ain Ngah Nasaruddin |
|
Article |
A novel means of improving the performance of reinforced concrete beams using the welded wire mesh as core zone reinforcement
|
D. Rama Seshu- Ch. Manjula- Kiran Kumar |
|
Article |
Integrated project delivery (IPD) method with BIM to improve the project performance: a case study in the Republic of Iraq
|
Mahdi Swadi Salim- Ahmed Mohammed Raoof Mahjoob |
|
Article |
Effect of foundation shape and properties of the adjacent buildings on the railway-induced vibrations- Pages 1095-1108
|
Jabbarali Zakeri, Morteza Esmaeili |
|
Article |
Comparison of aerodynamic coefficients of various types of Y-plan-shaped tall buildings- Pages 1109-1127
|
Prasenjit Sanyal, Sujit Kumar Dalui |
|
Article |
Black Hole Mechanics Optimization: a novel meta-heuristic algorithm- Pages 1129-1149
|
A. Kaveh, M. R. Seddighian, E. Ghanadpour |
|
Article |
Comparison of seismic behavior of steel building adjacent to slope topography by considering fixed-base, SSI and TSSI- Pages 1151-1169
|
Mohammad Javad Shabani, Ali Ghanbari |
|
Article |
Prediction of inelastic response of base-isolated building frame by pushover analysis- Pages 1171-1182
|
Mohit Bhandari |
|
Article |
Field occurrence of thaumasite sulfate attack: prevention perspective- Pages 1183-1192
|
Mohammad Javad Daeizadeh, Khashayar Ebrahimi |
|
Article |
Behaviour of cold jointed and layered Portland cement–alkali-activated reinforced concrete beams- Pages 1193-1204
|
Sulaem Musaddiq Laskar, Humayun Reja, Sudip Talukdar |
|
Article |
| Utilizing BIM technology to improve sustainability analyses for Iraqi Construction Projects- Pages 1205-1215 |
Farah Faaq Taha, Wadhah Amer Hatem, Nidal Adnan Jasim |
|
Article |
Improved metaheuristics through migration-based search and an acceptance probability for truss optimization- Pages 1217-1237
|
Sumit Kumar, Ghanshyam G. Tejani, Nantiwat Pholdee |
|
Article |
The effect of formwork liner on the service life of self-compacting concrete- Pages 1239-1247
|
S. Kandasamy, S. Kothandaraman |
|
Article |
Documentation of construction project using integration of BIM and GIS technique- Pages 1249-1257
|
Abbas Mahde Abd, Ali Hussein Hameed |
|
Article |
Quasi-static cyclic load performance of encased concrete-filled steel tubular with steel loops joint using sustainable concrete- Pages 1259-1267
|
P. S. Aravind Raj, R. Divahar, S. P. Sangeetha |
|
Article |
Exact solution of vibrations of beams with arbitrary translational supports using shape function method- Pages 1269-1286
|
Peter Chang, Xingzhuang Zhao |
|
Article |
Using measured mile method to quantify the loss of labor productivity in Iraqi construction site- Pages 1287-1296
|
Zahraa R. A. Al-Rubaye, Ahmed Mohammed Raoof Mahjoob |
|
Article |
| Probabilistic seismic hazard analysis and construction of design spectra for Pokhara valley, Nepal |
Rewati Baruwal- Bijaya Chhetri- Hemchandra Chaulagain |
|
Article |
Flexural strength and toughness of steel fiber reinforced concrete beams
|
P. B. Sakthivel- S. Vijay Aravind |
|
Article |
Sustainable approach to energy rating system for residential buildings
|
Shakila Pathirana- Rangika Halwatura- Asanka Rodrigo |
|
Article |
Development and testing of damage controllable precast beam–column connection under reverse cyclic loading
|
Thulasirajan Krishnan- Revathi Purushothaman |
|
Article |
Mechanical properties of contaminated concrete inhibited by Areca catechu leaf extract as a green corrosion inhibitor
|
Seyedmojtaba Ghoreishiamiri- Pandian Bothi Raja- Seyedeh Faezeh Hashemi Karouei |
|
Article |
Hysteresis performance of through bolted connections in CFST frame
|
K. P. Beena- M. S. Ajith- S. Sheela |
|
Article |
A comparative study on the implementation of carbon and glass fibers wrappings to improve the compressive strength and seismic behavior of concrete
|
Seiyed Ali Haj Seiyed Taghia- Hamid Reza Darvishvand- Mohammad Pourhasan |
|
Article |
Probabilistic seismic hazard analysis of Madhya Pradesh (Central India) using alternate source models: a logic tree approach
|
Ranjeet Joshi- Sudhir S. Bhadauria- Suresh S. Kushwaha |
|
Article |
Failure of concrete under impact: an experimental investigation and its numerical prediction
|
S. Janani- A. S. Santhi |
|
Article |
Deep cavity detection using propagation of seismic waves in homogenous half-space and layered soil media
|
Sohrab Mirassi- Hossein Rahnema |
|
Article |
Improving the performance of construction project using green building principles
|
Agung Sedayu- Arief Rakhman Setiono- Achmad Gat Gautama |
|
Article |
Shear resistance of concrete contribution in RC beams under flexure and shear
Authors
|
Mohammad Farzana- T. Anjani Prasad- G. Papa Rao |
|
Article |
Sensitivity analyses of the optimum design parameters of prestressed post-tensioned I-girder and deck-slab system
|
Tahsin Afroz Hoque Nishat- Raquib Ahsan |
|
Article |
Experimental and numerical investigation of T-joint enhanced confinement using flat steel strips
|
Qaiser uz Zaman Khan- Afaq Ahmad- Muhammad Nouman |
|
Article |